AWS E312-16 Stainless Steel Welding Electrode

APPLICATIONS:

Used for welding high carbon steel, tool steel and dissimilar metals

XUSUSIYATLARI:

E312-16 is a duplex stainless steel electrode with a titanium-calcium coating. The welding process performance is excellent, and it can be used for both AC and DC. Because the weld contains about 40% of ferrite, it has excellent crack resistance

DIQQAT:

1. Before welding, the electrode shall be baked at 300-350℃ for 1 hour and used as needed.
   2. Remove rust, grease, moisture and other impurities before welding.
   3. For welding hardenable steel, when using small current to weld complex and thick workpieces, the workpieces should be preheated at 150℃.
2.  

Payvandlash pozitsiyalari:

PA, PB, PC, PD, PE, PF

PACKAGING:

5kg/box, 4boxes/carton, 20kgs/carton, 50cartons/pallet. 21MT -26MT per 1X20″ FCL.

MATERIAL REQUIREMENTS FOR WELDING PARTS:

The steel numbers, specifications and ordering requirements of the raw materials of the welding parts shall comply with the requirements of the drawings or technical documents, and the material substitution system shall be strictly implemented for the substitution of materials.

The materials of the welding parts (steel plate, steel, welding rod, welding wire, flux and shielding gas, etc.) shall be inspected and accepted according to the relevant material standards when entering the factory. Materials that cannot be confirmed or have no certificate of conformity must be re-inspected. Can be used.

When selecting welding rods, wires, fluxes and shielding gases for welding parts, it should be based on the principle of equal strength between the weld metal and the base metal to ensure that the weld metal is not lower than the mechanical properties of the base metal, and should comply with the standard GB/ T 5117, GB/T 5118 and GB/T 8110.

Welding rods and fluxes with special instructions should be dried in accordance with the requirements of the instruction manual. The drying temperature without special requirements should meet the requirements of the table. Store it in an incubator after drying, and take it out when you need it. The welding rod should not be baked more than twice. The welding wire must be cleaned of oil and water before use.

2,5 mm (3/32 dyuym) x 300/350 mm; 2,5 kg / quti, har bir karton uchun 20 kg (8 quti).

3,2 mm (1/8 dyuym) x 350 mm; 5kgs / quti, har bir karton uchun 20kg (4 quti).

4,0 mm (5/32 dyuym) x 400 mm; 5kgs / quti, har bir karton uchun 20kg (4 quti).

5,0 mm x 450 mm; boshqa o'lcham, iltimos, bizning xizmatimizga murojaat qiling.

OEM/ODM to'plami mavjud:

Shimoli: 20.00KG, GV: 20.40KG,

Shuningdek, biz turli xil kgs paketlarini, plastik to'rva paketlarini,

biz sizning so'rovlaringiz bo'yicha paketni chop etishimiz mumkin, bizda sizning brendingiz va LOGO bilan paket dizaynini yaratish uchun professional dizaynerimiz bor.

Do'stona va uzoq muddatli hamkorlik uchun bizga tashrif buyurishga xush kelibsiz, iltimos, bizga vaqt jadvalingizni ayting, biz siz uchun tartibga solamiz. biz ham tegishli ko'rgazmalarga qo'shilamiz, ko'rgazmada bir-birimiz bilan uchrashishimiz mumkin. Do'stlik birinchi navbatda, biznes esa professional, siz bizga abadiy ishonishingiz mumkin.

1. Yetkazib beruvchi ishonchlimi?

Biz ushbu mahsulotni 30 yildan ortiq ishlab chiqaramiz, bizda Xitoyda ishlab chiqarilgan Alibaba-da reklama bor, buyurtma berganingizdan so'ng, qachon ishlab chiqarishni ko'rishni istasangiz, tekshirish uchun sizga video yoki rasm yuborishimiz mumkin. Bizning eksport jamoamiz ham 15 yildan ortiq tajribaga ega, biz biznesda duch keladigan barcha muammolarni hal qila olamiz. Bizga tashrif buyurishga xush kelibsiz.

2. Sifat barqarormi?

Biz ishlab chiqarishda tasodifiy sinovdan o'tkazamiz va jo'natishni sobiq ishdan oldin sinovdan o'tkazamiz. Har bir jo'natishni sifatli ta'minlash uchun bizda professional QC ishchilari va yuqori darajadagi sinov uskunalari mavjud.

3. To'lov xavfsizmi?

Sizning to'lovingiz xavfsiz holatda kelishini ta'minlash uchun biz Xitoydagi eng yirik banklardan birini tanlaymiz va barcha foyda kompaniyasi ularga yuk hujjatining nusxasini yozib olish uchun bankka yuborishi kerak.

4. Yuklarni yetkazib berish?

Odatda biz 15 kun ichida jo'natishni tashkil qilishimiz mumkin, agar paketni moslashtirsak, jo'natishni bir oy ichida tartibga solish mumkin, iltimos, mijozlarga xizmat ko'rsatish bilan muzokaralar olib boring, ishlab chiqarishimizni va buyurtma miqdorini tekshirgandan so'ng sizga aniq sanani aytib beramiz.

Savdo menejeri: Cherry Zhang

Tel: 0086-311-68035766

Faks: 0086-311-68035566

Mobil: 008613739727566

WhatsApp/Wechat: 008613739727566

Elektron pochta: info@steeltoolschina.com