Welding safety accident prevention measures

Preparation
Build a stable workbench: The welding workbench should be flat and solid, and the height should be consistent with the operator's height to facilitate welding work.
Clean the welding area: Make sure there are no debris and flammable materials in the work area, such as paint, solvents, gas, etc., to reduce the risk of fire.
Wear protective clothing: High temperature, ultraviolet rays, splashes, smoke and other harmful substances will be generated during welding. Workers should wear protective clothing with good flame resistance, high temperature resistance, and non-flammable, and pay attention to the quality and size.
Welding operation
Choose an appropriate welding method: In welding operations with high precision requirements, manual welding should be selected to avoid methods such as gas welding or arc welding that are difficult to control precision, so as to reduce safety hazards.
Keep the operating area well ventilated: The ultraviolet rays and smoke generated by welding will endanger the health of workers. Good ventilation can reduce the temperature of the operating area and reduce the risk of accidents.
Set up safety warning signs: Set up eye-catching and obvious safety warning signs in the welding area to warn other personnel.
Use appropriate welding equipment: Select welding equipment with stable and reliable brands and performance. Welders should master the corresponding skills, check and test the equipment frequently, and keep it intact and safe.
Stop work and handle accidents
Regular rest: The welding process is highly dangerous, and workers need to rest frequently, especially when working in high temperature and closed environments.
Handling foreign matter and other risks: Welders should pay attention to the surrounding environment at all times and deal with risks such as splashing metal, solution or smoke in a timely manner.
Accident handling: In the event of an accident, necessary medical care, emergency alarm, cause analysis, and enhanced safety inspections should be taken. Minor accidents should be handled together with relevant personnel, and major accidents should be notified to the public security organs and safety supervision departments.
End of work
After the welding operation is completed, turn off the welding equipment switch and disconnect the power supply to ensure the safety of the equipment and site.
Other measures
Implement the safety responsibility system: Strictly manage the safety of the construction site, implement the safety responsibility system step by step, clarify the division of labor and responsibilities of personnel, strengthen the review of on-site construction operators, and strictly control safety measures.
Prohibition of welding operations in business premises: Electric welding, gas welding, gas cutting, grinding wheel cutting, painting and other construction and maintenance operations with fire hazards are prohibited in crowded places that are in business and use.
Use qualified hot work operators: Construction units must use hot work operators who have passed the national formal training examination and whose special operation operation certificates are in line with the qualifications.
Maintain equipment: Develop a maintenance plan for welding equipment, regularly maintain the equipment, and ensure that the equipment is in good condition.
Organize emergency drills: According to the characteristics of welding operations and the requirements of emergency plans, regularly organize emergency drills to improve employees' emergency awareness and response capabilities, regularly check and evaluate the implementation of plans, and continuously improve and optimize.
Build a safety culture atmosphere: Comprehensively analyze the causes of accidents, clarify responsibilities, avoid similar accidents from happening again, formulate long-term safety management plans for problems, build a safety culture atmosphere, and promote employees' safety awareness.