FLUX CORED ARC WELDING (FCAW): LEARNING THE BASICS

Have you wondered, "What is flux core welding?" or "What is a flux core welder?" Also known as flux-cored arc welding (FCAW), it’s a type of welding suitable for both indoors and outdoors, enabling welders to meld metals and other materials together by applying heat and pressure.

During flux core wire welding, a continuous hollow wire electrode is fed through the welding gun. There are two types of flux-cored arc welding: gas-shielded and self-shielded. The gas-shielded method is similar to the popular welding process gas metal arc welding (also known as GMAW or metal inert gas [MIG] welding).

However, the self-shielded process is only similar to GMAW in the type of power supply it uses. Unlike GMAW, self-shielded FCAW does not require an external shielding gas.

The flux compound within the wire protects the weld pool by forming a gas as it reacts with the welding arc, making FCAW an ideal type of welding for materials contaminated with dirt and rust.

Keep reading to learn more about flux core welding basics and processes.

What Is Flux Core Welding Used For?

Flux-cored arc welding is a good technique to use on materials that are no thinner than 20 gauge, including carbon steel, low-alloy steels, high-nickel alloys, cast iron and stainless steels. The flux-cored wire is powerful and able to penetrate thick weld joints. For this reason, it can also prove more productive than other types of welding.

FCAW is often used in the construction industry, since this semiautomatic type of welding can be used outdoors, has a high welding speed and is easily portable.

FCAW can be used for projects like:

• Shipbuilding
• Construction
• Water tank repairs

When a welder needs to work outdoors or on contaminated materials, FCAW can produce high amounts of welds in a short amount of time.

However, FCAW isn’t ideal for everyone or every project. Let’s discuss the advantages and disadvantages of flux core welding.

Advantages

• Increased mobility: Since flux-cored welding contains its own shielding method, it doesn’t require an external gas and can be transported easier.
• High deposition rate: The rate of deposition in flux-cored welding is the highest of any welding method, increasing productivity. Deposition rate refers to the amount of filler metal melted into the weld joint.
• Versatility: Flux-cored welding can be performed in a variety of positions when the right filler material is used.

Disadvantages

• Fumes: FCAW needs to be performed in a well-ventilated area because it produces a large amount of fumes from the high deposition rate.
• Cleanup: Flux-cored welding is a process that produces slag, a layer of byproduct that takes time to be removed after a weld.
• Expense: Equipment used in FCAW processes tends to be more expensive and complex, including the electrode wire.

How Flux-Cored Arc Welding Works

Wondering how to weld flux core wire and the specific process? We have you covered.

Flux Core Welding Process

In FCAW, an electric arc unites a continuous filler metal electrode with the base material. As the welding process happens, the shield gas provided by the flux protects the weld pool from oxidation and other atmospheric elements.

After the weld is completed, there is slag that must be removed. Welders need to account for the time to remove slag to make the weld look clean. The welder should remove the slag between each pass.

Flux Core Welding Techniques

There are a few different processes a welder can use when performing flux-cored arc welding. As previously mentioned, these variants include self-shielded FCAW and gas-shielded FCAW.

Different fluxing agents provide different benefits to the welder. Self-shielded FCAW is typically used outdoors because FCAW using a separate gas shield would have issues with wind potentially blowing it away.

Flux agents used in gas-shielded processes are designed to help deliver deeper penetration and work with out-of-position welds. Gas-shielded welds are also known as dual shields because flux-cored welds already rely on the electrode for shielding.

Flux Core Welding Patterns

There are a variety of welding patterns that can be achieved with flux-cored welds. High and narrow welds, for example, can be achieved by using a backhand flux core welding motion.

There is a stringer bead method that deposits weld beads in a straight line, as well as a weave bead technique that forms a zigzag pattern.

TUBULAR WELDING WIRE FLUX CORED MIG WIRE

Flux Core Welding Wire Types

Wires for flux-cored arc welding differ depending on whether the process is self-shielded or gas-shielded. Self-shielded wires, or FCAW-S, don’t need an external gas cylinder. They are often used for portable jobs but do tend to produce more smoke and spatter.

Gas-shielded wires, or FCAW-G, require an external shielding gas. They are easier to control and produce aesthetically pleasing welds. They’re typically used in shop settings, since outside the gas could blow around.

FCAW-G wires tend to be less expensive than FCAW-S wires. Both wires are typically available in diameters ranging from .035 to 7/64 of an inch.

Flux Core Welding Polarity

The polarity for flux-cored arc welding processes depends on whether they are self-shielded or gas-shielded. Most gas-shielded welds work best with a direct-current electrode positive (DCEP) polarity. When using a self-shielded process, direct-current electrode negative (DCEN) polarity is used.

Flux Core Welding Equipment

To achieve a flux core weld, you will need:

• A power source (welding machine)
• Welding gun
• Welding wire
• Wire feeder
• Welding cables
• Ground clamp
• Chipping hammer

In addition to these tools, the welder should wear safety equipment, including an auto-darkening helmet, gloves and protective clothing.

Flux Core Welding vs. Other Types of Welding

Flux core welding is often compared to stick and MIG welding, and while it can be similar to these methods, it’s also unique in many ways. Let’s discuss how.

Flux Core Welding vs. Stick Welding

The primary difference between stick welding, also known as shielded metal arc welding (SMAW), and flux core welding is the physical structure of their electrodes.

Stick electrodes are metal rods coated in flux. As you weld, the metal center melds with your metal base while the flux casing melts and releases gas to protect the molten metal from contamination.

Flux core electrodes have a metal exterior that contains flux on the inside. Additionally, FCAW electrodes come in a spool and are fed through a semiautomatic welding gun managed by the welder. On the contrary, stick electrodes are long rods attached to an electrode holder managed by the welder’s hand.

Both welding types are self-shielded, removing the need for a gas agent like carbon dioxide. Because stick welding does not require a gas shield, it is also portable and fit for outdoor use.

SMAW also leaves behind slag that requires cleaning between each pass. However, it has a lower deposition rate than FCAW, making for a slower process. Stick welding is common in construction, pipelines, shipbuilding and underwater welding.

Flux Core Welding vs. MIG Welding

MIG welding, also called gas metal arc welding, uses a welding gun that is fed a solid wire from a spool. FCAW also receives a wire from a spool, except the wire is tubular instead of solid.

The shielding process is another difference between these welding types. As indicated by its name, GMAW requires a gas shield to protect the weld pool. The welding gun contains a nozzle that sends gas through it along with the welding wire to ensure a clean process.

Because MIG welding requires a gas shield, little splatter occurs, minimizing slag and making for an overall cleaner weld. However, it’s not fit for outdoor use as a draft can easily blow away the gas shield. It is also less portable because it requires transporting both the MIG machine and the shielding gas.

MIG welding is more expensive than FCAW and less compatible with various welding positions due to a high heat input. However, the MIG machine eases use, making it simple to learn.

MIG welding is also more versatile, as it can be used on multiple metals and alloys. Industries like manufacturing, automotive maintenance and production, pipe welding, construction, and shipbuilding use this type of welding.