AWS E309-16 (A302) Welding Electrodes for Stainless Steel

The stainless steel welding electrodes are Suitable for welding the same type of stainless steel, stainless steel lining, different steels (such as Cr19Ni10 and low carbon steel, etc.) as well as gaoluo steel, high manganese steel, etc

APPLICATIONS:

Suitable for welding the same type of stainless steel, stainless steel lining, different steels (such as Cr19Ni10 and low carbon steel, etc.) as well as gaoluo steel, high manganese steel, etc.

MGA KATANGIAN:

E309-16 is a Cr23Ni13 stainless steel electrode for rutile skin pressure equipment. Both ac and DC can be used for all position welding. Excellent welding performance. The deposited metal has good crack resistance and oxidation resistance.

PANSIN:

1. Before welding, the electrode shall be baked at 320-350℃ for 1 hour and used as needed.

2. Remove rust, grease, moisture and other impurities before welding.

3. DC power supply is recommended, because the depth of current welding is relatively shallow, the current should not be too large, so as to avoid redness and cracking of the skin.

4. Reduce the heat input as much as possible, and the swing amplitude of the electrode should not be too large.

5. Preheat and keep the temperature between channels below 150℃.

MGA POSISYON NG WELD:

PA, PB, PC, PD, PE, PF

PACKAGING:

5kg/box, 4boxes/carton, 20kgs/carton, 50cartons/pallet. 21MT -26MT per 1X20″ FCL.

OEM/ODM:

We support OEM/ODM and could make packaging accord to your design, please contact us for detail discussion.

Rule inspection:

Welding parts are inspected by the quality inspection department of the manufacturer.

For welds that require radiographic testing, the length of the welds subject to radiographic testing should not be less than 20% of the full length of the welds.

When an impermissible defect in the weld is found, supplementary radiographic testing shall be performed near the defect, and the supplementary radiographic inspection length shall be equal to the length of the radiographically inspected part of the weld. If an unallowable defect is found after supplementary radiographic testing, all welds should be radiographically tested.

For important welding parts, the appearance and geometric shape and size of the weld shall be inspected one by one. In addition to the appearance inspection of welds for general parts, the geometry and dimensions of welds shall also be randomly inspected.
For important parts or important welds of important parts, the requirements for non-destructive testing or sealing test and welding mechanical performance test shall be carried out in accordance with the specifications in the drawings or ordering technical requirements.

2.5mm (3/32”) x 300/350mm; 2.5kgs/kahon, 20kg(8kahon) bawat karton.

3.2mm (1/8”) x 350mm; 5kgs/box, 20kg(4boxes) bawat karton.

4.0mm (5/32”) x 400mm; 5kgs/box, 20kg(4boxes) bawat karton.

5.0mm x 450mm; ibang laki mangyaring makipag-ugnayan sa aming serbisyo.

Available ang OEM/ODM Package:

NW: 20.00KG, GW: 20.40KG,

maaari rin kaming gumawa ng iba't ibang kgs package, plastic bag package,

maaari naming i-print ang package bilang iyong mga kahilingan, mayroon kaming propesyonal na taga-disenyo upang gawin ang disenyo ng pakete gamit ang iyong tatak at LOGO.

Maligayang pagdating sa pagbisita sa amin para sa isang palakaibigan at pangmatagalang kooperasyon, mangyaring sabihin sa amin ang iyong iskedyul ng oras, ayusin namin para sa iyo. sasali din tayo sa mga relate exhibition, we can meet each other on the exhibition. Friendship muna, at propesyonal ang negosyo, mapagkakatiwalaan mo kami magpakailanman.

1.Maaasahan ba ang Supplier?

Ginagawa namin ang mga produktong ito nang higit sa 30 taon, nag-advertise kami sa Alibaba, Made-in-China, pagkatapos mong mag-order, tuwing gusto mong makita ang produksyon, maaari kaming magpadala sa iyo ng video o larawan upang suriin. Ang aming koponan sa pag-export ay mayroon ding higit sa 15 taong karanasan, maaari naming lutasin ang lahat ng problema na maaari mong matugunan sa negosyo. Maligayang pagdating sa pagbisita sa amin.

2.Stable ba ang Kalidad?

Sinusubukan namin nang random sa produksyon, at sinusuri ang kargamento bago gumana ang dating. Mayroon kaming mga propesyonal na manggagawa sa QC at mataas na antas ng kagamitan sa pagsubok, upang matiyak ang bawat kargamento sa magandang kalidad.

3. Ligtas ba ang Pagbabayad?

Pinipili namin ang isa sa pinakamalaking bangko sa China, upang matiyak na darating ang iyong bayad sa ligtas na kondisyon, at dapat ipadala sa kanila ng lahat ng kumpanya ng benepisyo ang kopya ng dokumento sa pagpapadala sa bangko para itala.

4.Shipment Delivery?

Karaniwan ay maaari naming ayusin ang kargamento sa loob ng 15 araw, kung ipasadya ang pakete, ang kargamento ay maaaring ayusin sa loob ng isang buwan, mangyaring makipag-ayos sa aming serbisyo sa customer, sasabihin namin sa iyo ang isang tiyak na petsa pagkatapos suriin ang aming produksyon at dami ng iyong order.

Sales Manager: Cherry Zhang

Tel: 0086-311-68035766

Fax: 0086-311-68035566

Mobile: 008613739727566

WhatsApp/Wechat: 008613739727566

Email: info@steeltoolschina.com