AWS E309-16 (A302) Welding Electrodes for Stainless Steel

The stainless steel welding electrodes are Suitable for welding the same type of stainless steel, stainless steel lining, different steels (such as Cr19Ni10 and low carbon steel, etc.) as well as gaoluo steel, high manganese steel, etc

APPLICATIONS:

Suitable for welding the same type of stainless steel, stainless steel lining, different steels (such as Cr19Ni10 and low carbon steel, etc.) as well as gaoluo steel, high manganese steel, etc.

XUSUSIYATLARI:

E309-16 is a Cr23Ni13 stainless steel electrode for rutile skin pressure equipment. Both ac and DC can be used for all position welding. Excellent welding performance. The deposited metal has good crack resistance and oxidation resistance.

DIQQAT:

1. Before welding, the electrode shall be baked at 320-350℃ for 1 hour and used as needed.

2. Remove rust, grease, moisture and other impurities before welding.

3. DC power supply is recommended, because the depth of current welding is relatively shallow, the current should not be too large, so as to avoid redness and cracking of the skin.

4. Reduce the heat input as much as possible, and the swing amplitude of the electrode should not be too large.

5. Preheat and keep the temperature between channels below 150℃.

Payvandlash pozitsiyalari:

PA, PB, PC, PD, PE, PF

PACKAGING:

5kg/box, 4boxes/carton, 20kgs/carton, 50cartons/pallet. 21MT -26MT per 1X20″ FCL.

OEM/ODM:

We support OEM/ODM and could make packaging accord to your design, please contact us for detail discussion.

Rule inspection:

Welding parts are inspected by the quality inspection department of the manufacturer.

For welds that require radiographic testing, the length of the welds subject to radiographic testing should not be less than 20% of the full length of the welds.

When an impermissible defect in the weld is found, supplementary radiographic testing shall be performed near the defect, and the supplementary radiographic inspection length shall be equal to the length of the radiographically inspected part of the weld. If an unallowable defect is found after supplementary radiographic testing, all welds should be radiographically tested.

For important welding parts, the appearance and geometric shape and size of the weld shall be inspected one by one. In addition to the appearance inspection of welds for general parts, the geometry and dimensions of welds shall also be randomly inspected.
For important parts or important welds of important parts, the requirements for non-destructive testing or sealing test and welding mechanical performance test shall be carried out in accordance with the specifications in the drawings or ordering technical requirements.

2,5 mm (3/32 dyuym) x 300/350 mm; 2,5 kg / quti, har bir karton uchun 20 kg (8 quti).

3,2 mm (1/8 dyuym) x 350 mm; 5kgs / quti, har bir karton uchun 20kg (4 quti).

4,0 mm (5/32 dyuym) x 400 mm; 5kgs / quti, har bir karton uchun 20kg (4 quti).

5,0 mm x 450 mm; boshqa o'lcham, iltimos, bizning xizmatimizga murojaat qiling.

OEM/ODM to'plami mavjud:

Shimoli: 20.00KG, GV: 20.40KG,

Shuningdek, biz turli xil kgs paketlarini, plastik to'rva paketlarini,

biz sizning so'rovlaringiz bo'yicha paketni chop etishimiz mumkin, bizda sizning brendingiz va LOGO bilan paket dizaynini yaratish uchun professional dizaynerimiz bor.

Do'stona va uzoq muddatli hamkorlik uchun bizga tashrif buyurishga xush kelibsiz, iltimos, bizga vaqt jadvalingizni ayting, biz siz uchun tartibga solamiz. biz ham tegishli ko'rgazmalarga qo'shilamiz, ko'rgazmada bir-birimiz bilan uchrashishimiz mumkin. Do'stlik birinchi navbatda, biznes esa professional, siz bizga abadiy ishonishingiz mumkin.

1. Yetkazib beruvchi ishonchlimi?

Biz ushbu mahsulotni 30 yildan ortiq ishlab chiqaramiz, bizda Xitoyda ishlab chiqarilgan Alibaba-da reklama bor, buyurtma berganingizdan so'ng, qachon ishlab chiqarishni ko'rishni istasangiz, tekshirish uchun sizga video yoki rasm yuborishimiz mumkin. Bizning eksport jamoamiz ham 15 yildan ortiq tajribaga ega, biz biznesda duch keladigan barcha muammolarni hal qila olamiz. Bizga tashrif buyurishga xush kelibsiz.

2. Sifat barqarormi?

Biz ishlab chiqarishda tasodifiy sinovdan o'tkazamiz va jo'natishni sobiq ishdan oldin sinovdan o'tkazamiz. Har bir jo'natishni sifatli ta'minlash uchun bizda professional QC ishchilari va yuqori darajadagi sinov uskunalari mavjud.

3. To'lov xavfsizmi?

Sizning to'lovingiz xavfsiz holatda kelishini ta'minlash uchun biz Xitoydagi eng yirik banklardan birini tanlaymiz va barcha foyda kompaniyasi ularga yuk hujjatining nusxasini yozib olish uchun bankka yuborishi kerak.

4. Yuklarni yetkazib berish?

Odatda biz 15 kun ichida jo'natishni tashkil qilishimiz mumkin, agar paketni moslashtirsak, jo'natishni bir oy ichida tartibga solish mumkin, iltimos, mijozlarga xizmat ko'rsatish bilan muzokaralar olib boring, ishlab chiqarishimizni va buyurtma miqdorini tekshirgandan so'ng sizga aniq sanani aytib beramiz.

Savdo menejeri: Cherry Zhang

Tel: 0086-311-68035766

Faks: 0086-311-68035566

Mobil: 008613739727566

WhatsApp/Wechat: 008613739727566

Elektron pochta: info@steeltoolschina.com