As one of the largest manufacturers of welding wire, our company is committed to producing high-quality products that meet the evolving needs of the welding industry.

An electrode is a conductor that is used to make contact with a nonmetallic part of a circuit. Electrodes are commonly used in electrochemical cells, semiconductors like diodes, and in medical devices. An electrode is classified as either a cathode or an anode depending on if current is flowing into or out of the electrode. Conventional current flows into a device through its anode and leaves the device through the cathode. An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit (e.g. a semiconductor, an electrolyte, a vacuum or air). The word was coined by William Whewell at the request of the scientist Michael Faraday from two Greek words: elektron, meaning amber (from which the word electricity is derived), and hodos, a way.An electrode in an electrochemical cell is referred to as either an anode or a cathode. The anode is now defined as the electrode at which electrons leave the cell and oxidation occurs (indicated by a minus symbol, "−"), and the cathode as the electrode at which electrons enter the cell and reduction occurs (indicated by a plus symbol, "+"). Each electrode may become either the anode or the cathode depending on the direction of current through the cell. A bipolar electrode is an electrode that functions as the anode of one cell and the cathode of another cell.

Piezoelectric materials have been analyzed for over 100 years, due to their ability to convert mechanical vibrations into electric charge or electric fields into a mechanical strain for sensor, energy harvesting, and actuator applications. A more recent development is the coupling of piezoelectricity and electro-chemistry, termed piezo-electro-chemistry, whereby the piezoelectrically induced electric charge or voltage under a mechanical stress can influence electro-chemical reactions. There is growing interest in such coupled systems, with a corresponding growth in the number of associated publications and patents. This review focuses on recent development of the piezo-electro-chemical coupling multiple systems based on various piezoelectric materials. It provides an overview of the basic characteristics of piezoelectric materials and comparison of operating conditions and their overall electro-chemical performance. The reported piezo-electro-chemical mechanisms are examined in detail. Comparisons are made between the ranges of material morphologies employed, and typical operating conditions are discussed. In addition, potential future directions and applications for the development of piezo-electro-chemical hybrid systems are described. This review provides a comprehensive overview of recent studies on how piezoelectric materials and devices have been applied to control electro-chemical processes, with an aim to inspire and direct future efforts in this emerging research field.

The solid electrode pattern is the most common or “standard” electrode pattern that is applied to piezoelectric ceramics manufactured by American Piezo. APC’s solid electrode pattern is applied using a silk screening process to the positive and negative surfaces of the ceramic. The entire ceramic is then polarized to give it its piezoelectric properties. The solid electrode pattern is the most cost effective pattern to be manufactured and therefore results in a less expensive piezoelectric ceramic for the end customer.

Piezoelectric Effect is the ability of certain materials to generate an electric charge in response to applied mechanical stress. The word Piezoelectric is derived from the Greek piezein, which means to squeeze or press, and piezo, which is Greek for “push”.One of the unique characteristics of the piezoelectric effect is that it is reversible, meaning that materials exhibiting the direct piezoelectric effect (the generation of electricity when stress is applied) also exhibit the converse piezoelectric effect (the generation of stress when an electric field is applied).When piezoelectric material is placed under mechanical stress, a shifting of the positive and negative charge centers in the material takes place, which then results in an external electrical field. When reversed, an outer electrical field either stretches or compresses the piezoelectric material.The piezoelectric effect is very useful within many applications that involve the production and detection of sound, generation of high voltages, electronic frequency generation, microbalances, and ultra fine focusing of optical assemblies. It is also the basis of a number of scientific instrumental techniques with atomic resolution, such as scanning probe microscopes (STM, AFM, etc). The piezoelectric effect also has its use in more mundane applications as well, such as acting as the ignition source for cigarette lighters.

Piezoelectric Effect is the ability of certain materials to generate an electric charge in response to applied mechanical stress. The word Piezoelectric is derived from the Greek piezein, which means to squeeze or press, and piezo, which is Greek for “push”.One of the unique characteristics of the piezoelectric effect is that it is reversible, meaning that materials exhibiting the direct piezoelectric effect (the generation of electricity when stress is applied) also exhibit the converse piezoelectric effect (the generation of stress when an electric field is applied).When piezoelectric material is placed under mechanical stress, a shifting of the positive and negative charge centers in the material takes place, which then results in an external electrical field. When reversed, an outer electrical field either stretches or compresses the piezoelectric material.The piezoelectric effect is very useful within many applications that involve the production and detection of sound, generation of high voltages, electronic frequency generation, microbalances, and ultra fine focusing of optical assemblies. It is also the basis of a number of scientific instrumental techniques with atomic resolution, such as scanning probe microscopes (STM, AFM, etc). The piezoelectric effect also has its use in more mundane applications as well, such as acting as the ignition source for cigarette lighters.

The world’s energy crisis and environmental pollution are mainly caused by the increase in the use of fossil fuels for energy, which has led scientists to investigate specific cutting-edge devices that can capture the energy present in the immediate environment for subsequent conversion. The predominant form of energy is mechanical energy; it is the most prevalent energy in the environment and can be harvested for conversion into useful, electrical energy. Compared with electromagnetic, electrostatic, magneto strictive, dielectric elastomer and frictional electric transducers, piezoelectric transducers have higher high electrical and mechanical constants, large electromechanical coupling coefficients, high dielectric numbers and low losses and are currently the most dominant method of mechanical energy acquisition. Therefore, the research of piezoelectric transducers has received great attention from the scientific community. This paper reviews the research progress of piezoelectric energy acquisition technology. The main objective of this paper is to compile, discuss and summarize the recent literature on piezoelectric energy harvesting materials and applications. Piezoelectric catalytic materials, piezoelectric supercapacitors (SCs), piezoelectric self-charging devices and piezoelectric electrochemical energy storage are mainly introduced. This review briefly introduces the recent advances in piezoelectric-based catalysts and electrochemical energy storage, concentrating on the attributes of various piezoelectric materials and their uses.

Piezoelectric actuators and other piezoelectric components feature a compact size and low profile, no electromagnetic noise, and a host of other advantages. For this reason, they are increasingly used for auto-focus actuators in cameras and for other applications. Currently, the only practical piezoelectric materials are lead-based materials, and so lead-based materials are widely used in piezoelectric components.Although the lead contained in piezoelectric components is not subject to the RoHS directive and other environmental regulations, it is preferable that a lead-free alternative be developed for the future. Also, lead-based piezoelectric materials cannot be co-fired with Ni, and so currently, high-cost Ag/Pd (palladium) is used for the inner electrodes when stacking. Lead-free piezoelectric materials, on the other hand, enable the possibility of use of low-cost Ni. This paper presents our work in successfully fabricating lead-free multilayer piezoelectric ceramics with Ni inner electrodes.

I'm putting together a grant application on advanced FSAW-type piezoelectric resonators coupled to a transmon qubit. To my points: Can you supply 4 inch or 6 inch wafers with thin films of Niobium deposited? >If so, what substrates are possible and what layer thicknesses, and do you have any characterisation of the layer morphology, properties, etc.? Is Niobium on Lithium Niobate possible? >Would it be possible to give me a quote, or an indicative non-binding ballpark price, to assist me with preparation of the grant? Thanks for taking the time to read my message. I'm really excited about this project, so if this is work you are interested in then I'd be very keen to pursue this. In any case, if you can let me know, I'd appreciate it. Best regards, have a good day.

Oscar Kjellberg invented the world’s first coated welding electrode in 1904 by dipping a bare wire into a mixture of carbonates (including wood pulp, or cellulose) and silicates to act as a binder. While advances in metallurgy, electrode coating composition, and manufacturing techniques continue to this day, the fundamental principles of shielded metal arc welding (SMAW), also commonly known as stick welding, remain.

Stick welding is one of the oldest and most certainly one of the most widely used welding methods across various industries. The advantages include low cost, high versatility, speed, and penetration, making it a favorite in multiple industrial applications.However, Stick welding can also be highly versatile for home and DIY projects and on-field repairs. That's why, in this article, we'll delve into the core principles, equipment selection, safety measures, and step-by-step techniques on how to Stick weld. Once you get the hang of it, you can achieve strong, durable welds with this versatile and enduring welding process.

If you are first learning SMAW, you may want to opt for a user-friendly rutile electrode. However, anyone who plans to weld professionally or critical structures (and that includes farm implements) should learn with the electrodes used for these applications, and that means mastering basic and cellulosic electrodes.

Stick welding is one of the oldest types of welding and is still widely used today on various applications, such as construction and earth moving equipment, thanks to its simple technique. While it may not be as easy as MIG welding for a beginner, it’s definitely not as hard as TIG welding.Stick welding is a good middle ground and is perfect for those who don’t want the hassle of a gas tank or want to weld thicker pieces of metal.

Probably, STICK welding is the process most widely used worldwide. The reason behind this might be its simplicity, portability, and good deposition rates. It is often considered the most basic and easiest form of welding.Nevertheless, not everyone likes this process. Some people consider that with so many other options nowadays, using STICK welding might be like going back in time. So, let’s dig deeper into what STICK is and what can still be used for.

Welding electrodes are metal wires with baked on chemical coatings. The rod is used to sustain the welding arc and to provide the filler metal required for the joint to be welded. The coating protects the metal from damage, stabilizes the arc, and improves the weld. The diameter of the wire, less the coating, determines the size of the welding rod. This is expressed in fractions of an inch such as 3/32", 1/8", or 5/32." The smaller the diameter means it requires less current and it deposits a smaller amount of filler metal.

Shielded Metal Arc welding is the process of joining two metal pieces using a flux covered electrode which is melted in an electric arc and becomes a fused part of the pieces being welded. This article will describe the use of flux-coated welding rods and a simple, transformer type cracker box welding machine.

Stick welding is a popular and versatile welding technique that is used in a wide range of applications, but the one question that has stumped many welding enthusiasts is “Is the stick welding electrode positive or negative?” This simple yet crucial aspect of stick welding can have a significant impact on the quality and strength of your welds. Whether you’re a seasoned welder or just starting out, understanding the polarity of stick welding electrodes is essential for producing top-notch welding results. 

Embarking on my recent journey into the realm of welding, specifically the area of stick welding, I was met with a mix of challenges and gratifying experiences. My objective in writing this article is to delve into and share the wealth of knowledge and insights I’ve gathered, aiming to navigate beginners through the intricate yet intriguing world of stick welding. In this piece, I intend to thoroughly examine stick welding from the perspective of an enthusiast like myself, weighing its advantages and drawbacks, and juxtaposing it with other prevalent welding techniques to assist you in determining its suitability for your needs.

Technically called Shielded Metal Arc Welding, stick welding is an electrical arc welding process. Many prefer to use the slang “Stick Welding” as the metal is in the form of a stick. It uses electricity for melting electrode sticks or rods by melting both the electrode and the metal joint together. It will also fill the joint with filler metal.In stick welding, the current passes through the electrode which is covered in a layer of flux. The electrode protects the weld pool and it can provide a strong weld by fusing the metal joint and electrode together. It has to be noted that the melted flux will have slag on the top. Welders will have to cut it off or brush it to remove the slug.Stick welding can be great for thicker metals making it ideal for the fabrication of the structural sheets, tractor repairs, plant construction, farm equipment fixing, and welding pipe. You can weld different types of metals like stainless steel, chrome, aluminum, and nickel-based alloys.

When it comes to welding, choosing the right wire is crucial for achieving the desired results. Two popular options are flux-cored wire and solid MIG wire. Both have their own unique characteristics and are used for different purposes.Flux-cored wire is known for its ability to weld in windy conditions and in areas without a clean environment. On the other hand, solid MIG wire is preferred for its smooth and consistent welds.But which one is better for your project? This article will explore the differences between flux-cored wire and solid MIG wire, including their pros and cons, so that you can make an informed decision.